Warning: This post curing apparatus uses UV LED light sources of high energy UV rays that can cause serious harm to eyes and skin. Avoid direct or indirect exposure to such emissions even for short periods of time.
Warning: Avoid opening the curing compartment lid during operation. If you need to open the lid during a post-curing cycle, pause or stop the program on the touch screen before opening. The PCA 4000 is equipped with an automatic switch-off system of the UV LEDs if the curing compartment lid is opened during operation.
Warning: The safety systems on the PCA 4000 are intended as emergency aids: do not tamper in any way with the integrity of the UV oven or any part thereof, and do not tamper with the closed-lid control system. In the case of a malfunction of the safety system or in the case of the LEDs remaining on while the curing compartment lid is open, immediately remove the power plug from the outlet and contact EnvisionTEC technical support.
Warning: The PCA 4000 is powered at 220 V. Avoid tampering with the equipment and all of its parts to avoid the risk of electrocution. In case of malfunction of the PCA 4000 contact EnvisionTEC technical support.
Warning: The PCA 4000 has a touchscreen interface and does not use commands or mechanical buttons. Even when the apparatus is not currently operating it remains powered on. Unplug the power cable to the PCA 4000 if it will not be used for an extended period of time, especially when left unattended.
Warning: The PCA 4000 utilizes the heat generated by the LEDs to accelerate the curing process of the resins. The cured models and the oven itself may be very hot.
Warning: The PCA 4000 uses the heat generated by the LEDs to accelerate the curing process of the resin. Do not leave unattended to avoid the risk of fire.
Warning: During post-curing, the models can generate heat, especially if grouped in large quantities. Never leave the PCA 4000 unattended to avoid the risk of fire.
Warning: The materials placed to cure in the PCA 4000 could generate fumes that are harmful to health. Position and use the PCA 4000 in a well-ventilated place.
Warning: The fan in the PCA 4000 controls the temperature of the device through numerous air vents placed at different points on the device. To avoid damaging the unit, do not obstruct in any way the cooling ducts, the openings to the outside, and the fan itself.
Warning: The PCA 4000 is a device for professional use. Keep the post-curing apparatus in a safe place and accessible only to qualified operators. Do not allow children to use it.
Warning: Place the PCA 4000 away from heat sources, flammable materials, and liquids that may cause a safety risk. Clean the unit only with a clean, dry cloth. Do not expose to water.