skip to Main Content

How to Unpack the PCA 4000:

  1. Carefully open the packaging: Do not use blades that could damage the contents.
  2. Accessories for the PCA 4000 are packed on the top foam panel: power cable, post-curing tray, and tray supports to hold the post-curing tray in place. Remove these from the box and set them aside.
  3. Extract the PCA 4000 from the box by lifting upwards.
  4. Remove the foam panels from the top and bottom. Keep the box and foam panels. 
  5. Situate the PCA 4000 on a secure surface.

Was this article helpful?

×Close search
Back to top