skip to Main Content

How to Prepare Material for Printing?

Always wear gloves when handling the materials and reference the respective Safety Data Sheet.

Do not use other materials than the photopolymers delivered by EnvisionTEC®.

Use the appropriate personal protective equipment.

Make sure that the extraction is sufficient. EnvisionTEC® recommends an air change of 25 m³/h per m² effective surface of the laboratory as described in EN 13779.

Do not overfill the material tray. See the Adding the Material section for your printer for more information.

1. Open the hood.

2. Place the material tag on the material tag reader.

3. Shake the material bottle well.

4. Open the material bottle.

5. Pour the material slowly into the material tray.

6. Mix the material thoroughly with the supplied playing cards.

7. Close the hood.

Was this article helpful?

×Close search
Back to top