skip to Main Content

How to clean the D4K Pro build platform:

Time needed: Approximately two minutes

Maintenance frequency: Print-by-Print

Seeing the Signs:

  • build platform becomes sticky
  • when changing the material type


1. Clean the surface of the build platform using a clean paper towel.

2. Check every surface for material, buildup, or stickiness. 

3. Clean the excessive buildup using a small amount of 99% IPA on a clean paper towel or Q-tip.

Use 99% IPA away from the material tray and thoroughly wipe all IPA completely from the build platform before installing it back onto the printer.

Was this article helpful?

×Close search
Back to top