skip to Main Content

How to maintain the D4K Pro power cycle:

Time needed: Approximately five minutes

Maintenance frequency: Weekly

Overview: It is recommended to power cycle the printer under any of the following conditions:

  • the printer is running slowly
  • the printer was recently updated, or
  • the printer has not been powered down in a week


1. Power off the printer using the touch screen: tap Home > Settings > Power > Power Off.

2. Once the printer has completely turned off, disconnect the power cable from the side of the printer. 

3. Push and hold the power button on the front of the printer for 10 seconds to drain all power from the printer. 

4. Plug the power cable back in.

5. Power on the printer using the front power button.

Was this article helpful?

×Close search
Back to top