skip to Main Content

What is the build platform?

The build platform is an assembly comprised of:

  • A large, flat platform
  • Two handles

The flat area of the build platform is where cured material will adhere during the printing process.

How to install D4K Pro build platform:

To attach the build platform, proceed as follows:

1. Open the protection door.

2. Slide the build platform onto the receptor held on the Z slide.

3. Tighten down the build platform clamp to secure the build platform.

4.  Check that the build platform is secured in position.

Make sure the build platform is tightened down securely before building.

Failure to do so will cause the build platform to be uneven and can cause build failures.

Previous step
Next step copy

Was this article helpful?

×Close search
Back to top