skip to Main Content

Time needed: Approximately five minutes
Maintenance frequency: Weekly
Overview: In case something does not stick to the platform or falls down from the supports, it is necessary to inspect the safety glass right away and clean it.

The printer is powered off.
The build platform and the material tray are removed from the printer.

Supplies needed:
Absorbent paper towels
99% isopropyl alcohol (IPA)
Microfiber cloth
Lens or window cleaner

How to clean the Envision One cDLM safety glass:

1. Spray a small amount of alcohol directly on the paper towel.

Do not spray alcohol anywhere in the printer or directly on the glass panel.

2. Wipe down the top surface of the safety glass.
3. Take the microfiber cloth and spray a small amount of lens or window cleaner on it.
4. Wipe down the top surface of the safety glass with the cloth. Make sure that it is dry in the end.

Make sure that the safety glass is absolutely clean so that there is no smudging, streaking, or material spots anywhere on it.

Was this article helpful?

×Close search
Back to top