skip to Main Content

Cleaning the Protection Hood

The protection hood must be cleaned regularly from dust.

Step-by-Step:

  1. Switch off the printer.
  2. Disconnect the printer from the power supply.
  3. Moisten a paper wipe with a little bit of isopropanol and carefully wipe the protection hood.

Clean the protection hood only with damp paper using small quantities of isopropanol.

Cleaning the Lens

The lens must be cleaned regularly from dust as the light must not be blocked on its way from the projector to the material tray.

Step-by-Step:

  1. Switch off the printer.
  2. Disconnect the printer from power supply.
  3. Open the printer door using the supplied key.
  4. Remove the black curtain.
  5. Moisten a microfiber cloth with a little bit of glass cleaner and carefully wipe the key pad.
  6. Put the black curtain back to its place.
  7. Lock the printer door.

Clean the lens only with glass cleaner and microfiber cloths for optical components.

Do not use cleaning alcohol.

Was this article helpful?

×Close search
Search
Back to top