skip to Main Content

Manual Debris Removal is a software feature that helps protect the surface of the material tray by exposing a thin layer of material. When the exposed layer is peeled away, a clean material tray surface is left.

How to use the Manual Debris Removal feature:

Manual Debris Removal is a software feature that helps protect the surface of the material tray by exposing a thin layer of material. When the exposed layer is peeled away, a clean material tray surface is left.

1. Tap Settings | Manual Debris Removal to open the tab.

→ The following screen appears.

2. Set the required exposure time using the + and

3. Tap [Expose].

→ The whole material tray area has been exposed.

4. Remove debris from the material tray by simply taking off the thin film of exposed material.

5. The Manual Debris Removal feature only removes debris stuck to the surface of the material tray – for debris floating in the material, the material will need to be filtered.

Was this article helpful?

×Close search
Search
Back to top