skip to Main Content

How to install the material tray:

Use a different material tray for each type of material to avoid contamination.

1. Open the printer hood.

2. Slide the material tray along the rails towards the Z-axis.

3. Ensure the material tray is pushed all the way in and the back lip of the material tray is touching the foam pad at the base of the Z-axis.

Pushing the material tray in all the way is very important. If the material tray is fully in position, the build platform could hit the top of the material tray at the start of the print job!

Was this article helpful?

×Close search
Search
Back to top