skip to Main Content

External Hardware

Suction Cup Lifter

Required for removing the projection glass to access the projector lens. This procedure may be required at the discretion of a certified EnvisionTEC technician or distributor. 

Calibration Plate

Required for the projector light calibration. This procedure may be required at the discretion of a certified EnvisionTEC technician or distributor. 

Focus Film

Required for the projector focus calibration. This procedure may be required at the discretion of a certified EnvisionTEC technician or distributor. 

Starter Kit

Scraper

Removes the cured parts from the build platform. The scraper can also be used to remove material residue from the surface of the build platform.

Feeler Gauge

Required for the home position calibration. This procedure may be required at the discretion of a certified EnvisionTEC technician or distributor.

Material Mixing Cards

The supplied set of cards is ideal to mix material in the material tray between print jobs without scratching the surface. This is important, as only by using a perfectly transparent material tray, exact build results can be guaranteed.

Accessories

PWA 2000 Parts Washing Apparatus

The Parts Washing Apparatus is a convenient tool to assist in cleaning any uncured resin from 3D printed models.  The convenient removable basket allows for ease of use when dipping or extracting objects from the tank.

Was this article helpful?

×Close search
Search
Back to top